Used motorcycles
Kawasaki NINJA 125 2026
don't wait any longer, contact the seller of this NINJA 125
-
Selling price
4,990 € - Mileage
503 km - Category
Sport - 1st registration
2/8/26 -
125 cc - On sale since
5/10/26 - One previous owner
- 5 photos
- My motorcycle insurance with AMV
A word from the seller
: équipements Pot Arrow
La mensualité affiche dans le l'annonce correspond à un financement de 36 mois avec 0 d'apport avec carte grise, frais annexes et assurance de financement compris dans la simulation.
Possibilité d'achat direct. Assurance sur place possible.
Possibilités d'accessoires complémentaires, moto garantie 4 ans.
Pour tout question, contacter le magasin par message, mail ou téléphone.
,1ère main,Compatible Permis A2,Disponible à l'essai
MOTO MOVE GROUPE MOTO MOVE CHATEAUROUX CONCESSION SUZUKI KAWASAKI YAMAHA 11 Avenue d'Occitanie 36250 SaintMaur. 02.54.22.14.18
un crédit vous engage, vérifiez vos capacités de remboursement, plus de renseignements en magasin.
Contact the seller
Contact
Eric
Concession
MOTO MOVE INTEGRAL
City
36250 ST MAUR
Phone number
See the phone number
Location
Specifications Kawasaki Ninja 125 2026
- Chassis
- Two-seater saddle
- Frame : Tubular steel mesh
- Fuel capacity : 11 liters (2.91 US gallons)
- Seat height : 785 mm (30.91 in)
- Length : 1,935 mm (76.18 in)
- Width : 685 mm (26.97 in)
- Min height : 1,075 mm (42.32 in)
-
Min. ground clearance : 170 mm (6.69 in)
- Wheelbase : 1,330 mm (52.36 in)
- Weight when fully loaded : 148 kg (326 lb)
- Front axle
- Telehydraulic fork Ø 37 mm, Wheel travel : 110 mm (4.33 in)
- Angle de chasse : 23.8 °
- Braking 1 disc Ø 290 mm (11.42 in), 2-piston caliper
- Front tire (Tubeless) : 100 / 80 - 17 → Order this type of tire
- Pressure : 2 bar
- Transmission
- 6 stage gearbox , manual
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 120 mm (4.72 in)
- Braking 1 disc Ø 220 mm (8.66 in), 2-piston caliper
- Rear tire (Tubeless) : 130 / 70 - 17 → Order this type of tire
- Pressure : 2.25 bar
- Motor
- single-cylinder , 4 strokes
- Injection Ø 28 mm
- Cooling system : liquid
- 2 ACT
- 4 valves
- 125 cc
- 15 ch (14.80 hp) to 10,000 rpm
- 1.20 mkg to 7,700 rpm
- Power-to-weight ratio : approximately 9.3 kg/ch
- Weight / torque ratio : approximately 114.74 kg/mkg
- Compression : 11.7 : 1
- Starting system : electric
- CO² emissions: 61 g/km
- Standard equipment
- Brake assist : ABS
- Practical information
Motorcycle specifications
Kawasaki Ninja 125 2026
The first aspi'
Information
Other used motorcycles
helmet
Gloves
jacket
braking
Chain kit
Oils
Find an intercom
Parts
Luggage
Tires