Honda GL 1800 GOLDWING TOURING DCT 2023 for 24990 in LANESTER

A word from the seller

Contact the seller

Contact

Ethan

Concession

SELECT MACHINES

City

56600 LANESTER

Phone number

See the phone number

Location

Chassis: Frame : Double aluminium beam, Diamant type; Fuel capacity : 21 liters (5.55 US gallons); Seat height : 745 mm (29.33 in); Length : 2,475 mm (97.44 in); Width : 925 mm (36.42 in); Min height : 1,340 mm (52.76 in); Wheelbase : 1,695 mm (66.73 in); Weight when fully loaded : 367 kg (809 lb)

Front axle: Quadrilateral fork with double longitudinal arms; Braking 2 discs Ø 320 mm (12.6 in), radial mounting, caliper 6 pistons; Front tire : 130 / 70 - 18 → Order this type of tire; Pressure : 2.5 bar

Transmission: 7 stage gearbox , dCT dual-clutch robotized system; Secondary cardan shaft

Rear axle: Mono-damper; Braking 1 disc Ø 316 mm (12.44 in), caliper 3 pistons; Rear tire : 200 / 55 - 16 → Order this type of tire; Pressure : 2.8 bar

Motor: 6 cylinders flat , 4 strokes; Injection Ø 50 mm; Cooling system : liquid; 2 x 1 ACT, Unicam; 4 valves per cylinder; 1,833 cc; 126 ch (124.30 hp) to 5,500 rpm; 17.30 mkg to 4,500 rpm; Power-to-weight ratio : approximately 2.81 kg/ch; Weight / torque ratio : approximately 20.18 kg/mkg; Compression : 10.5 : 1; CO² emissions: 130 g/km

Standard equipment: Brake assist : ABS; Number of riding modes : 4; Storage volume : 60 liters; TFT Full-Colour screen size: 17.78 cm (7 inches); Gear indicator; Cruise control; Automatic transmission; Radio; Bluetooth; GPS; USB plug; Hill Hold Control; Keyless ignition; Electronically adjustable suspension; Torque control; Saddlebags; Tire pressure monitoring system