Motorcycle specifications Royal-Enfield Bullet 500 Trials Works Replica 2019 Retracing your steps
presentation of the Bullet 500 Trials Works Replica 2019
it would be wrong to think that only certain trails, cross-country and enduro machines find virtues in putting their boots down in the mud. Royal Enfield thinks that one of these roadsters can cope with this kind of outing, and has come up with the Bullet 500 Trials Works Replica.
to mop up between fields, and above all to pay homage to Johnny Brittain. Mainly riding a Bullet 350, he won almost 50 races in the 50s, including the International Six Days Trial (ISDT).
Without becoming a WRF, the Indian takes some equipment to ensure in the "difficult" courses. It was fitted with block tires, a raised exhaust, lightened mudguards, fork gussets, reinforced handlebars and a protective grille for the headlight. The seating position has been changed to make it more suitable for solo expeditions - the passenger seat has been replaced by a package holder.
the mechanics remain unchanged. Still smelling of the technology and performance of another era, the single-cylinder output is 27.2 hp and almost 4.3 mkg.
The Royal Enfield Bullet 500 Trials Works Replica, produced in a limited series, will make its first appearance at Wheels & Waves in Biarritz (June 12 to 16, 2019) and then at the Café Racer Festival in Montlhery (June 22 and 23, 2019).
M.B - Manufacturer images
by Greg
Greg is the founder of Motoplanete—a website created in 2001 to share his passion with his friends and showcase as many motorcycle models as possible to his readers. Self-taught and a jack-of-all-trades, his discovery of the world of motorcycles led him to work as a photographer, rider, team manager, web developer, graphic designer, editorial assistant, and editor-in-chief.
Share
Key facts Royal-Enfield Bullet 500 Trials Works Replica (2019) : What you need to know before you buy
Prices
| Basic version | |
|---|---|
 France |
5,795€
|
Model sold in 2019
Performance
- Max speed : approximately 130 km/h (80.80 mph)
- Average fuel consumption : 3.50 liters/100km (0.67 mpg)
-
Estimated range
: 386 km (240 miles)
Calculated range until tank is empty, not verified.
Specifications Royal-Enfield Bullet 500 Trials Works Replica 2019
- Chassis
- Frame : tubular steel cradle
- Fuel capacity : 13.50 liters (3.57 US gallons)
- Seat height : 800 mm (31.50 in)
- Length : 2,080 mm (81.89 in)
- Width : 805 mm (31.69 in)
- Min height : 1,123 mm (44.21 in)
- Wheelbase : 1,380 mm (54.33 in)
- Dry weight : 192 kg (423 lb)
- Front axle
- Telescopic fork Ø 35 mm, Wheel travel : 130 mm (5.12 in)
- Braking 1 disc Ø 280 mm (11.02 in), 2-piston caliper
- Front tire : 90 / 90 - 18 → Order this type of tire
- Pressure : 1.24 bar
- Transmission
- 5 stage gearbox
- Secondary by chain
- Rear axle
- 2 lateral shock absorbers, Wheel travel : 80 mm (3.15 in)
- Braking 1 disc Ø 240 mm (9.45 in), single-piston caliper
- Rear tire : 110 / 80 - 18 → Order this type of tire
- Pressure : 1.93 bar
- Motor
- single-cylinder , 4 strokes
- Injection
- Cooling system : by air
- tumbled
- 2 valves per cylinder
- 499 cc
- 27 ch (26.60 hp) to 5,250 rpm
- 4.30 mkg to 4,000 rpm
- Power-to-Weight Ratio : 7.22 kg/ch
- Torque-to-Weight Ratio : 44.65 kg/mkg
- Compression : 8.5 : 1
- Standard equipment
- Brake assist : ABS
- Practical information
Essentials
Motoblouz
LaBécanerie
Gallery
Models
2019
Used
Competitors
Compare the Bullet 500 Trials Works Replica to its competitors
Compared to its 2 direct competitors, this Bullet 500 Trials Works Replica offers a fairly balanced positioning, sitting right in the middle of the category. On the spec sheet, it highlights torque of 4.3 Nm and torque-to-weight ratio of 44.65 kg/Nm. Its power-to-weight ratio of 7.22 kg/ch betrays a bit of extra heft on the scales.
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the Bullet 500 Trials Works Replica 2019
- What is the power of the Bullet 500 Trials Works Replica?
-
The Bullet 500 Trials Works Replica 2019 develops a power of 27 ch (26.60 hp)
- What is the torque of the Bullet 500 Trials Works Replica?
-
The maximum torque of the Bullet 500 Trials Works Replica 2019 is 4.30 mkg to 4,000 rpm.
- What is the maximum speed of the Bullet 500 Trials Works Replica?
-
The Bullet 500 Trials Works Replica 2019 is capable of reaching a top speed of approximately 130 km/h (80.80 mph) on the track.
- What is the weight of the Bullet 500 Trials Works Replica?
-
The Bullet 500 Trials Works Replica 2019 has a a dry weight of 192 kg (423 lb).
- What is the fuel consumption of the Bullet 500 Trials Works Replica?
-
Average fuel consumption is estimated at 3.50 l/100km (0.67 mpg) according to the WMTC cycle.
- QWhat is the seat height of the Bullet 500 Trials Works Replica?
-
To ensure good accessibility, the Bullet 500 Trials Works Replica 2019 offers a minimum seat height of 800 mm (31.50 in).
- What is the price of the Bullet 500 Trials Works Replica?
-
The price of the Bullet 500 Trials Works Replica 2019 is 5,795€ in France
- What size tires should I put on my Bullet 500 Trials Works Replica?
-
The standard size for a Bullet 500 Trials Works Replica 2019 is 90 / 90 - 18 for the front, and 110 / 80 - 18 for the rear.
News
-
2026 MXGP of China: Herlings Unbeatable, McLellan Delays the MX2 Title
-
MXGP 2027: Kove and ZXMoto Join the Championship
-
SC Project is working on the 2026 Suzuki GSX-R1000R.
-
2026 MXGP of Turkey: Herlings Crowned World Champion!
-
Moto Guzzi: In Mandello, the historic factory is taking on a new scale.
-
ZXMoto in MXGP 2027: The Hypothesis of an Off-Road Earthquake
-
Superbike - Will 240 ch sport bikes soon be available at dealerships?
-
2 new SC-Project mufflers for the R 12 NineT and G/S.
-
Seiko unveils a watch inspired by the Honda Motocompo.
-
The new motorcycle models of 2026 and the evolutions.
Bikers' reviews Leave a review