presentation of the SMV 750 DORSODURO Factory 2012
lighter, more efficient, more fun... The first two arguments are those of all Aprilia Factory versions(RSV-R 1000, Tuono R, RSV4); a notable optimization to raise the machine's level of efficiency a notch. The third is for the machine's wild side.
In its turn, the spirited Dorsoduro supermotard comes in a Factory version. It's impossible not to suspect that this version is hot-blooded: the red frame, barely concealed beneath the black dress, betrays an ebullient temperament. To earn the Factory label, an Aprilia must meet certain criteria. This starts with the use of carbon fiber parts. On the SVM 750, it's the front mudguard, the wide side scoops and most of the fuel tank cladding that benefit from the nobility of this material.
secondly, the suspension. Factory models are normally fitted with Öhlins elements. But this is not the case on the Dorsoduro. A minor disappointment, as the prestigious name would lead us to believe. That's not to say that forks and shock absorbers remain standard. They are fully adjustable for preload, compression and rebound. The base version doesn't get as much attention to fine-tuning its handling.
with this toy, there's now plenty of room for serious nerdiness. The 92hp twin is equipped with a triple-mapping control unit and Ride by Wire injection. New petal brake discs are bitten by Brembo 4-piston radial calipers. Chassis-wise, Aprilia's technology suffers no criticism whatsoever, with the exception of some damping issues, which this Factory version should rectify. Expect to pay around 800 euros more for this Dorsoduro Factory, and a further 600 euros if you want ABS (due in September).
M.B - Factory photos
Key facts Aprilia SMV 750 DORSODURO Factory (2012) : What you need to know before you buy
Highlights
- Sporty supermotard
- Powerful Twin
- Improved suspension
- Carbon parts
Weak points
- No Öhlins suspension
- Autonomies
- Autonomies
Prices
| Basic version | with ABS | |
|---|---|---|
|
8,999€
|
9,499€
|
Performance
- Max speed : over 200 km/h (124.30 mph)
- 0-100 km/h acceleration : 3.90 s
- Average fuel consumption : 6.50 liters/100km (0.36 mpg)
-
Estimated range
: 185 km (115 miles)
Calculated range until tank is empty, not verified.
Specifications Aprilia SMV 750 DORSODURO Factory 2012
- Chassis
- Frame : Tubular steel mesh connected to 2 aluminum plates
- Fuel capacity : 12 liters (3.17 US gallons)
- Seat height : 870 mm (34.25 in)
- Length : 2,216 mm (87.24 in)
- Width : 905 mm (35.63 in)
- Min height : 1,185 mm (46.65 in)
- Wheelbase : 1,505 mm (59.25 in)
- Dry weight : 184 kg (406 lb)
- Weight when fully loaded : 210 kg (463 lb)
- Front axle
- Reverse telehydraulic fork Ø 43 mm, Wheel travel : 160 mm (6.30 in)
- Braking 2 discs Ø 320 mm (12.6 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Pressure : 2.3 bar
- Transmission
- 6 stage gearbox
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 160 mm (6.30 in)
- Braking 1 disc Ø 240 mm (9.45 in), single-piston caliper
- Rear tire : 180 / 55 - 17 → Order this type of tire
- Pressure : 2.5 bar
- Motor
- two-cylinder 90° L-shape , 4 strokes
- Injection
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 749.90 cc
- 92 ch (90.70 hp) to 8,750 rpm
- 8.40 mkg to 4,500 rpm
- Power-to-weight ratio : 2.03 kg/ch
- Weight / torque ratio : 21.9 kg/mkg
- Compression : 11 : 1
- Practical information
Essentials
Gallery
Used
Compare the SMV 750 DORSODURO Factory to its competitors
Acceleration
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the SMV 750 DORSODURO Factory 2012
- What is the power of the SMV 750 DORSODURO Factory?
-
The SMV 750 DORSODURO Factory 2012 develops a power of 92 ch (90.70 hp)
- What is the torque of the SMV 750 DORSODURO Factory?
-
The maximum torque of the SMV 750 DORSODURO Factory 2012 is 8.40 mkg to 4,500 rpm.
- What is the maximum speed of the SMV 750 DORSODURO Factory?
-
The SMV 750 DORSODURO Factory 2012 is capable of reaching a top speed of over 200 km/h (124.30 mph) on the track.
- What is the weight of the SMV 750 DORSODURO Factory?
-
The SMV 750 DORSODURO Factory 2012 has a a dry weight of 184 kg (406 lb), a weight when fully loaded of 210 kg (463 lb).
- What is the fuel consumption of the SMV 750 DORSODURO Factory?
-
Average fuel consumption is estimated at 6.50 l/100km (0.36 mpg) according to the WMTC cycle.
- QWhat is the seat height of the SMV 750 DORSODURO Factory?
-
To ensure good accessibility, the SMV 750 DORSODURO Factory 2012 offers a minimum seat height of 870 mm (34.25 in).
- What is the price of the SMV 750 DORSODURO Factory?
-
The price of the SMV 750 DORSODURO Factory 2012 is 8,999€ in France. It is displayed at 9,499€ in France with ABS.
- What size tires should I put on my SMV 750 DORSODURO Factory?
-
The standard size for a SMV 750 DORSODURO Factory 2012 is 120 / 70 - 17 for the front, and 180 / 55 - 17 for the rear.
News
-
2026 MXGP of China: Herlings Unbeatable, McLellan Delays the MX2 Title
-
MXGP 2027: Kove and ZXMoto Join the Championship
-
SC Project is working on the 2026 Suzuki GSX-R1000R.
-
2026 MXGP of Turkey: Herlings Crowned World Champion!
-
Moto Guzzi: In Mandello, the historic factory is taking on a new scale.
-
ZXMoto in MXGP 2027: The Hypothesis of an Off-Road Earthquake
-
Superbike - Will 240 ch sport bikes soon be available at dealerships?
-
2 new SC-Project mufflers for the R 12 NineT and G/S.
-
Seiko unveils a watch inspired by the Honda Motocompo.
-
The new motorcycle models of 2026 and the evolutions.

Motoblouz

LaBécanerie





Bikers' reviews Leave a review - 1 review