presentation of the HM 796 Hypermotard 2012
its displacement has been scaled down to appeal to a wider audience, without sacrificing the HM spirit. In fact, the 796 retains the uncompromising lines of the 1100, even retaining an inverted fork with radial brake calipers, an all-digital dashboard, and pots under the engine.the late 800 Monster S2R was also equipped with one.
But let's take a look at the new twin installed in the little Hypermotard. With a cubic capacity of 803 cm3 (but marketing has retained the name 796...), this oil-cooled desmodromic mill has the same bore (88 mm) as the 696 Monster, but a longer stroke (66 mm) than the latter. It delivers just a tad more power than the 696, i.e. 81 hp. But it's the torque that makes all the difference: 7.7 mkg spread over a much more usable range.
the 696 Hypermotard is just as attractive as its big brother, the 1100, yet much more accessible. It's a featherweight, weighing 167 kg dry, with a seat height of 825 mm - 20 mm less than the 1100 - and an APTC clutch. This system, first introduced on the 620 Monster, reduces lever effort, acts as a torque damper and prevents the rear wheel from locking up during aggressive downshifts.
The 796 HM will be available in a discreet mix of white and black. The red version, more traditional and striking, will require a small additional effort of 310 euros.
M.B - Manufacturer's photos
Key facts Ducati HM 796 Hypermotard (2012) : What you need to know before you buy
Highlights
- Style
- Efficiency
- More accessible
- New engine
Weak points
- Autonomies ?
- Tachometer readability
Prices
| Basic version | |
|---|---|
|
9,190€
|
Performance
- Max speed : 200 km/h (124.30 mph)
Specifications Ducati HM 796 Hypermotard 2012
- Chassis
- Frame : Tubular steel mesh
- Fuel capacity : 12.40 liters (3.28 US gallons)
- Seat height : 825 mm (32.48 in)
- Length : 2,120 mm (83.46 in)
- Min height : 1,155 mm (45.47 in)
- Wheelbase : 1,455 mm (57.28 in)
- Dry weight : 167 kg (368 lb)
- Front axle
- Marzocchi reverse telehydraulic forks Ø 43 mm / Marzocchi, Wheel travel : 165 mm (6.50 in)
- Braking 2 discs Ø 305 mm (12.01 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Pressure : 2.2 bar
- Transmission
- 6 stage gearbox
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 141 mm (5.55 in)
- Braking 1 disc Ø 245 mm (9.65 in), 2-piston caliper
- Rear tire : 180 / 55 - 17 → Order this type of tire
- Pressure : 2.2 bar
- Motor
- two-cylinder 90° L-shape , 4 strokes
- Injection Ø 45 mm
- Cooling system : combined air / oil
- 1 ACT, desmodromic
- 2 valves per cylinder
- 803 cc
- 81 ch (79.90 hp) to 8,000 rpm
- 7.70 mkg to 6,250 rpm
- Power-to-Weight Ratio : 2.09 kg/ch
- Torque-to-Weight Ratio : 21.69 kg/mkg
- Compression : 11 : 1
- Practical information
Essentials
Gallery
Used
Compare the HM 796 Hypermotard to its competitors
Compared to its direct competitor, this HM 796 Hypermotard offers an appealing positioning, managing to stand out in certain specific areas. It stands out with top speed of 200 km/h, while also delivering weight of 167 kg. Its power-to-weight ratio of 2.09 kg/ch betrays a bit of extra heft on the scales.
Acceleration
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the HM 796 Hypermotard 2012
- What is the power of the HM 796 Hypermotard?
-
The HM 796 Hypermotard 2012 develops a power of 81 ch (79.90 hp)
- What is the torque of the HM 796 Hypermotard?
-
The maximum torque of the HM 796 Hypermotard 2012 is 7.70 mkg to 6,250 rpm.
- What is the maximum speed of the HM 796 Hypermotard?
-
The HM 796 Hypermotard 2012 is capable of reaching a top speed of 200 km/h (124.30 mph) on the track.
- What is the weight of the HM 796 Hypermotard?
-
The HM 796 Hypermotard 2012 has a a dry weight of 167 kg (368 lb).
- QWhat is the seat height of the HM 796 Hypermotard?
-
To ensure good accessibility, the HM 796 Hypermotard 2012 offers a minimum seat height of 825 mm (32.48 in).
- What is the price of the HM 796 Hypermotard?
-
The price of the HM 796 Hypermotard 2012 is 9,190€ in France
- What size tires should I put on my HM 796 Hypermotard?
-
The standard size for a HM 796 Hypermotard 2012 is 120 / 70 - 17 for the front, and 180 / 55 - 17 for the rear.
- Where can I find high-quality used HM 796 Hypermotards?
-
You can find used HM 796 Hypermotard at great prices on MotoPlanete, in the section dedicated to them—models from professionals and private sellers, as well as spare parts.
News
-
Spidi Carbo Track Evo 2 Gloves: The Top-of-the-Line Track Gloves
-
Bridgestone Battlax A42: The 2027 Road-Trail Tire
-
CFMOTO 675SR-R: Official Motorcycle of the WorldWCR Starting in 2027
-
News on the Street Triple 798, Bonneville 400, Tiger 900, and Tiger 1200.
-
2026 MXoN in Ernée: Belgium Wins, France Falls
-
Furygan offers an airbag vest designed specifically for women.
-
Top 10 Best Scooters of 2026: Our Complete Ranking.
-
Motorcycle Intercoms—A Practical Guide to Choosing the Right One for Your Needs.
-
HJC is gearing up for a big year in 2027, with eight new helmets.
-
The new motorcycle models of 2026 and the evolutions.

Motoblouz

LaBécanerie





Bikers' reviews Leave a review - 2 reviews
possibility of buying a 22L tank on the internet (around 500euros)
all in all, a great bike to enjoy and keep your points Rating : 5/5 Respond to Mike