Motorcycle specifications KawasakiNinja 1000 ZX-10R KRT Replica 2018 The Kawasaki Racing Team as standard

A few tweaks in 2018 for the KRT Replica color; just enough to make it a little more acidic. Now the Ninja identity of the range, this deco confirms its success, just as the ZX-10R designs and maintains it. With the number of victories it has racked up in WSBK, the green hypersport can unabashedly claim to be the ultimate mistress of the category's top riders. Jonathan Rea was a masterful World Champion aboard it in 2015 and 2016; Tom Sykes owes him an impressive harvest of Superpoles. To show that it is the fruit of constant development by the Kawasaki Racing Team (K.R.T), the machine has been available since 2016 in this provocative racing dress.

The war paint displayed is that worn by factory machines competing in the WSBK championship. An eye-catching detail: the compression chambers and fork caps are anodized in grey (green on the standard ZX-10R). The exacerbated competitive spirit it exudes goes surprisingly well with the potential it contains.

the big Ninja hasn't really changed visually since its predecessor, but it has been delicately styled. With its more chiselled headlights, slimmer rear end and tapered exhaust, the machine is more elegant, almost softer. With subtle hints of the 636, it's more accommodating than disturbing. The old"bio-medicalized" rear light unit gives way to a much more successful design. All in all, she exudes that imperceptible something that adds to her class. The bow blades of the fairing are retained, as are the generous tank covers. The design above the fork head has been reworked. Gone is the exception of having a bubble without edges; the cockpit accompanies it on its edges, thus reducing vibrations. Miss Ninja seems to care about the rider, accompanying the effort and giving a little respite on long straights swallowed at full speed. This is evidenced by slightly increased protection and small ears cut almost at the top of the fork head. This would reduce the depression behind the bubble and limit helmet shake.
However, the pencil has not been forced onto the drawing board. You'll have to keep your eyes peeled to distinguish the two generations of ZX-10R; we've seen more marked evolutions.

in competition, it's not really the evocative design that will be at the center of discussions. Instead, we'll be talking about...
Wait, what are those tubes in front of the brake calipers?! Gosh, that looks an awful lot like an Öhlins pressurized fork. You know, the kind of front end you only find on MotoGP, WSBK, EWC and Greek shipowners. Let's come down to earth and appreciate Showa's technology. The technical approach is much the same as that of the Swedish manufacturer's FGR. Damping is no longer managed in the bushes, but in these small external chambers, filled with nitrogen. As a result, the damping is more stable, the fork works better and lets you appreciate even more what's going on under the wheel. Until now, this type of fork has only been seen in top-level competition. Showa has democratized it with this BFFF (Balance Free Front Fork), just as inverted forks and radial calipers are gradually appearing.
And here's the second bonus. This front drivetrain has not ceased to amaze us. Forget the Tokico and the petal wafers. Smell the delicate, acrid scent of molten metal under Brembo's assault. This time, it's more than serious. The brake discs are 330 mm in diameter (+20 mm), and the brake shoes are M50 monobloc. All under the control of aviation hoses and a radial-pump master cylinder. Enough to make a Ducati 1299 Panigale or an MV-Agusta F4 jealous; and you know how an Italian brakes. But will the graft take as well on a Japanese bike?!
ABS? Always present, and now impossible to do without. The KIBS goes so far as to detect a rear-wheel lock-up caused by a hard downshift, and therefore doesn't kick in. It can be deactivated with the electronic key supplied in the racing kit (more on this later). The Öhlins steering damper is retained, to calm the steering.

before tackling the chapter on the ever-increasing number of impressive electronic aids, let's let the engine have its say. It's a supercharged muscle with the performance of a madman. Don't get stuck on the maximum power of this 4-cylinder. Kawasaki maintains its 200 horsepower (210 with forced air intake), just like yesterday, and that's enough to dislodge 99% of what's running. The engine-makers' work, largely influenced by KRT's work, is going in the direction of a fuller, better-breathing engine, with less inertia when revving (was there any?). I'll spare you all the technical modifications... But if you really want to know, you'll find all the details at the bottom of the page. Highlights include a larger airbox and a much more aerated filter, a lightened crankshaft, thicker cylinder walls, optimized camshafts, new exhaust valves and a new, more compact engine.larger exhaust valves, improved gas evacuation, lighter, stronger pistons, a refined intake and a more compact gearbox. Gears 2 and 6 have been shortened, making it easier to get out of corners and hit top gear. Oh, by the way, the gearbox is located higher up, so you can open it without having to drain the mill. How convenient.
The power is there, with a desire to be more exploitable. The choice of cartography supports this approach. 3 modes are available, delivering 60% (low), 80% (middle) or 100% (full) of the 998 cm3's watts.
With all these evolutions, it's enough to make you wonder if the Kawasaki Racing Team doesn't want to invite itself into your garage. The electronic arsenal too?

for the most part, yes. Theold ZX-10R already had its answer in this respect. Now it's time to move on to the next stage, between power-assisted driving and a manned mission to Mars. KIBS, as we've already seen above. But the ZX-10R"phase 6" has even more underneath. The big change on this Ninja is the adoption of Bosch's UMI, 5-axis inertial control (longitudinal, transverse and vertical acceleration, roll rate and pitch rate). And there aren't many bikes on the market with this intelligent control module. The latest 1299 Panigale and R1 do their thing brilliantly, and the 10R is now up to speed. The Akashi-based manufacturer adds a personal touch with the calculation of yaw angle, provided by the ECU. This allows the on-board electronics to "see" in 3D where the bike is in space and how it reacts, enabling them to act with great efficiency.
Traction control takes full advantage. The S-KTRC no longer relies solely on the difference in wheel speeds to intervene. With the help of UMI measurements, it can act according to track conditions, tires, machine glide and wheeling. Amazing! It can now be set to five levels instead of three.
The ZX-10R is also equipped with Launch Control, even more effective than that of the H2 and H2R, and KEBC, which acts on engine braking.
If you're going to steal things from the H2R, why not steal its KQS? This is Kawa's shifter, allowing you to shift gears without clutching. On uphill only. For downhill, you'll have to check with the Racing Kit.

s-KTRC, KEBC, UMI, KLCM, KIBS, KQS... Haven't we forgotten someone? Well, doesn't this Kawa have a structure? Arf, electronics are so much in the forefront on these cars that you'd almost forget about the chassis. But the bugger does most of the work. Even better from this point on. We've seen that the front drivetrain takes its standards up a notch. To transform, it relies on the double-beam aluminum perimeter frame, modified only in the thickness of the walls, which are thinner but just as solid. The main changes concern geometry. The steering column has been moved back 7.5 mm, while the swingarm has been lengthened by 15.8 mm. The increased wheelbase should provide a little more stability, although no one has complained about this. As for the chassis modifications, they result in more weight on the front wheel, favoring corner entry feel.
That's right, the weight. One wonders where Kawa slipped a brick onto its sporty 1000. The specification sheet announces an extra 5 kgs, or 206 units. Probably the catalytic converter and other crap.
The rear monoshock and its quasi-horizontal kinematics are retained; the Showa BFRC Lite is lighter, with a separate damping function (as for the fork) and easier adjustments. The ZX-10R is a weapon! Finely honed to cut through the competition.

the bar graph on the dashboard, not always appreciated, has also been retained. The instrument panel gets a few more lights, the digital window changes its layout a little, and a brightness sensor automatically dims the instrument panel.

the Kawasaki ZX-10R is more about evolution than real redesign. It does, however, significantly improve an already high level of efficiency. Perhaps we would have appreciated the option of semi-active suspension... The most hardcore riders will focus more on the racing kit. The steering column can be adjusted by 4 mm using a set of spacers. Another set of parts can be used to modify the swingarm axis. There are also a whole host of engine parts, as well as the electronic key mentioned in the ABS chapter. This allows you to deactivate the anti-lock braking system, fine-tune the riding aids, reprogram the ECU to gain 10 horsepower and smooth out the power curves; and finally, with the racing harness, the shifter works for both upshifting and downshifting.
Now, turn the key in the contactor, close the visor, let it express itself, ride... You're in racing mode, while the stopwatch sweats.

M.B - Manufacturer's photos

a little more technique:

all the evolutionary work Kawasaki has put into its new ZX-10R fits on 29 pages. Let's concentrate on the engine and its main technical modifications:

- The intake ducts are machined using a cutting-edge technique borrowed from Kawasaki's WSBK team: their outlet ports are machined in two stages, first with the valve seats and then at an angle. In this way, the air follows a straighter path as it enters the combustion chamber. As well as smoothing the flow, this wider, straighter duct geometry enables a greater volume of air/fuel mixture to be drawn in, to the benefit of power. As before, the intake ducts are polished.

- In the same spirit of increased power, the exhaust ducts are also wider, straighter and now polished.

- The larger diameter of the exhaust valves (Ø 24.5 mm -> Ø 25.5 mm) also increases power, particularly at high revs. Inlet valve diameter remains unchanged at 31 mm.
/ Both intake and exhaust valves are made of titanium, a material with high thermal resistance and reduced moving mass.
The reworked cam profile lengthens the crossover period, for greater power (especially at high revs).
/ Chromoly camshafts contribute to the overall weight reduction. They benefit from a nitride surface treatment.

- Combustion chamber shape evolves for improved intake and exhaust efficiency

- To handle the higher engine load, the pistons have been shortened (39.2 mm -> 37.7 mm) and their crowns redesigned. Each piston is 5 grams lighter, for improved engine response. In addition, they are made from a new material that is both more robust and extremely heat-resistant. Finally, the addition of a dry lubricating film on the skirt reduces friction at low revs and facilitates piston running-in.

- The crankshaft's moment of inertia is reduced by 20%, one of the most important results of the lessons learned by the Kawasaki WSBK Team. The performance gain is noticeable at all levels: acceleration, deceleration and cornering.

- The new material of the connecting rod bearings enhances their endurance at high revs, while their new coating improves resistance to seizure.

- At cylinder level, the bore walls are thicker (5 mm -> 6 mm) to match rigidity to power gains, which also benefits reliability.

- The use of electronic throttle control justifies the adoption of a new 32-bit electronic control unit (ECU). The resin-free aluminum casing promotes heat dissipation, and hence reliability.