presentation of the Anniversary 2026
Brough Superior celebrates its centenary, with a model even more sumptuous than the SS 100 and Pendine Sand Racer. The famous English brand earned its letters of nobility in the first half of the twentieth century - a Brough celebrating a century of existence has to live up to its reputation as the "Rolls Royce of motorcycling". Such is the case with this impressively luxurious Anniversary model.
The SS 100 on which the Anniversary is based has been extensively reworked. The French workshops producing the English models have set the bar a little higher than usual, to match Renaud Lavillenie's performance. The beauty is immediately recognizable with its double optics topped by a special cap. It can also be dressed up with a single eye, which also looks great. It is held in place by a frame proudly bearing the 100 crest. This reminder of Brough's age can also be found on either side, under the saddle and at the end of the rear hull.
The stern is even more astonishing, with a transformation of the 4 silencers, each taking on a conical shape and then bevelling the ends. The rear section, inspired by the Pendine Sand Racer, is another styling highlight.
The finishing work justifies the bike's exceptional status. Some parts, like the tank, are machined over half their surface to create a singular contrast. The rims are fitted with grooved spokes and a 4D four-disc brake system from Beringer, typical of this special edition. The mudguards are also new. Everywhere you look, you'll find mass-produced parts, noble upholstery, hand-picked components and a craftsman's eye for detail, right down to the last bolt.
Like its siblings, the Anniversary is built on a tubular titanium frame designed to disappear beneath the bodywork. This gives way to the spectacular Fior-type aluminum fork. And the engine. A 102-horsepower twin that's a sight to behold. The factory can boost it to 130 hp on request, for track use only. In fact, only the power can be modified. Like all exceptional products, this bike can be easily customized to suit the wishes of future owners.
The Anniversary is a true definition of French haute couture, in the service of one of Britain's most emblematic brands. This Brough Superior will be produced in a limited edition of 100 units, at an outrageous price of 100,000 euros.
M.B - Manufacturer's photos
Key facts Brough Superior Anniversary (2026) : What you need to know before you buy
Specifications Brough Superior Anniversary 2026
- Chassis
- Vehicle not capable of carrying passengers
- Frame : tubular titanium frame
- Seat height : 820 mm (32.28 in)
- Length : 2,180 mm (85.83 in)
- Width : 760 mm (29.92 in)
- Min height : 1,108 mm (43.62 in)
- Wheelbase : 1,540 mm (60.63 in)
- Dry weight : 186 kg (410 lb)
- Front axle
- Fior aluminum front axle, Wheel travel : 120 mm (4.72 in)
- Angle de chasse : 23.36 °
- Braking 4 Beringer discs Ø 230 mm (9.06 in), radial mounting, 4-piston caliper
- Front tire (Tubeless) : 120 / 70 - 18 → Order this type of tire
- Pressure : 2.4 bar
- Transmission
- 6 stage gearbox , manual
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 130 mm (5.12 in)
- Braking 1 Beringer disc Ø 230 mm (9.06 in), 2-piston caliper
- Rear tire (Tubeless) : 160 / 60 - 18 → Order this type of tire
- Pressure : 2.6 bar
- Motor
- two-cylinder 88° V-shape , 4 strokes
- injection Ø 50 mm
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 997 cc
- 102 ch (100.60 hp) to 9,600 rpm
- 8.90 mkg (87 Nm) to 7,300 rpm
- Power-to-weight ratio : 1.85 kg/ch
- Weight / torque ratio : 20.9 kg/mkg
- Compression : 11 : 1
- Starting system : electric
- Standard equipment
- Brake assist : ABS
- Practical information
- Country of manufacture : France
Essentials
Gallery
Used
Compare the Anniversary to its competitors
FAQ Your frequently asked questions about the Anniversary 2026
- What is the power of the Anniversary?
-
The Anniversary 2026 develops a power of 102 ch (100.60 hp)
- What is the torque of the Anniversary?
-
The maximum torque of the Anniversary 2026 is 8.90 mkg (87 Nm) to 7,300 rpm.
- What is the maximum speed of the Anniversary?
-
The Anniversary 2026 is capable of reaching a top speed of approximately 200 km/h (124.30 mph) on the track.
- What is the weight of the Anniversary?
-
The Anniversary 2026 has a a dry weight of 186 kg (410 lb).
- QWhat is the seat height of the Anniversary?
-
To ensure good accessibility, the Anniversary 2026 offers a minimum seat height of 820 mm (32.28 in).
- What is the price of the Anniversary?
-
The price of the Anniversary 2026 is 103,000€ in France
- Is the Anniversary approved for transporting a passenger?
-
No, this vehicle is only suitable for 1 people; it is a single-seater.
- What size tires should I put on my Anniversary?
-
The standard size for a Anniversary 2026 is 120 / 70 - 18 for the front, and 160 / 60 - 18 for the rear.
- What colors are available for the Anniversary?
-
For the 2026 model year, the Anniversary is available in several colors: blue and black.
News
-
They set out on a 100,000-kilometer journey on a Guzzi 1000 Stelvio.
-
Marc Chevallier takes us on a journey through the 24 Hours of Barcelona.
-
The End of a Legend: The Yamaha R6 Bids Farewell.
-
Spidi introduces the Tech Armor 2 jacket to keep you cool on the road.
-
2027 Update for BMW Models.
-
Rumors of Volkswagen Selling Ducati: An Update
-
Yamaha has signed Martin and Ogura for the next two seasons.
-
MotoGP: Fabio Quartararo is leaving Yamaha at the end of 2026!
-
SC-Project offers two mufflers for the KTM 990 RC R.
-
The new motorcycle models of 2026 and the evolutions.

Motoblouz

Maxxess
LaBécanerie
Speedway





Bikers' reviews Leave a review