presentation of the YZF-R1 1000 Pirovano Replica 2020
Sports bikes are undoubtedly the best way to honor riders and teams, past and present. The Yamaha R1 loves this exercise. Its generations have worn the colors of Petronas, GMT 94, Spies, FIAT MotoGP,Agostini...
...and here of the late Italian rider Fabrizio Pirovano. One of the most enduring protagonists in World Superbike history. The R1 presented here is painted in the same colors as the Yamaha YZF 750 SP n°5 with which "Piro" won his last race.
It was in 1993, at Estoril. Symbolically, Yamaha unveiled this replica edition on the same circuit 27 years later. A tribute, and a fine work of art. After its presentation for the final round of the 2020 WSBK season and an on-track salute, this unique R1 was put up for auction on Ebay - https://www.ebay.co.uk/itm/One-of-a-kind-Fabrizio-Pirovano-Replica-Yamaha-R1/383775664109 - The money raised will go to the Oncologia Niguarda Onlus cancer research foundation. An association that Pirovano's family has supported since his death in 2016.

The R1 Pirovano replica is an emotion from the other side, ready to slap the curves. Prepared for sport use by Yamaha Motor Europe, it limits itself to a border close to Superstock. The pink and white colors of the YZF 750 are set against a track fairing stripped of all on-road hardware. A GYTR racing saddle sits on a single-seater rear frame. A pair of slicks lets you hear the sound of rubber in the corners. A high bubble provides extra protection, while the crossplane engine blows through an Akrapovic muffler. This saves a little power and a lot of weight.
But we didn't want to overdo it. No changes to the suspension or adjustable footpegs.
Nicknamed "the King of Monza", Fabrizio Pirovano spent 13 years in the world of World Superbikes, racing in SBK and then SuperSport. His list of achievements includes 10 victories, 47 podiums, a world title in WSS, two runner-up finishes in SBK and four Italian championships, all in SBK.
In World Superbike, Piro raced Yamaha bikes for 6 years running. His hands also grasped handlebars at Suzuki, Ducati and Bimota. Emotions ran high at the last start of his life - the memory lives on in hypersport.
Image credits: Yamaha Europe
Key facts Yamaha YZF-R1 1000 Pirovano Replica (2020) : What you need to know before you buy
Specifications Yamaha YZF-R1 1000 Pirovano Replica 2020
- Chassis
- Frame : diamond aluminum perimeter
- Fuel capacity : 17 liters (4.49 US gallons)
- Seat height : 855 mm (33.66 in)
- Length : 2,055 mm (80.91 in)
- Width : 690 mm (27.17 in)
- Min height : 1,165 mm (45.87 in)
- Wheelbase : 1,405 mm (55.31 in)
- Weight when fully loaded : 200 kg (441 lb)
- Front axle
- Reverse telehydraulic fork Ø 43 mm, Wheel travel : 120 mm (4.72 in)
- Braking 2 discs Ø 320 mm (12.6 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Transmission
- 6 stage gearbox , manual - shifter as standard
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 120 mm (4.72 in)
- Braking 1 disc Ø 220 mm (8.66 in), single-piston caliper
- Rear tire : 190 / 55 - 17 → Order this type of tire
- Motor
- 4 cylinders online , 4 strokes
- Injection
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 998 cc
- 202 ch (199.20 hp) to 13,500 rpm
- 11.70 mkg to 11,500 rpm
- Power-to-weight ratio : approximately 0.93 kg/ch
- Weight / torque ratio : approximately 15.83 kg/mkg
- Compression : 13 : 1
- Standard equipment
- Brake assist : ABS as standard
- Practical information
Gallery
Used
Compare the YZF-R1 1000 Pirovano Replica to its competitors
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
CO² emissions
FAQ Your frequently asked questions about the YZF-R1 1000 Pirovano Replica 2020
- What is the power of the YZF-R1 1000 Pirovano Replica 2020?
-
The YZF-R1 1000 Pirovano Replica 2020 develops a power of 202 ch (199.20 hp)
- What is the torque of the YZF-R1 1000 Pirovano Replica 2020?
-
The maximum torque of the YZF-R1 1000 Pirovano Replica 2020 is 11.70 mkg to 11,500 rpm.
- What is the maximum speed of the YZF-R1 1000 Pirovano Replica 2020?
-
The YZF-R1 1000 Pirovano Replica 2020 is capable of reaching a top speed of over 300 km/h (186.40 mph) on the track.
- What is the weight of the YZF-R1 1000 Pirovano Replica 2020?
-
The YZF-R1 1000 Pirovano Replica 2020 has a a weight when fully loaded of 200 kg (441 lb).
- QWhat is the seat height of the YZF-R1 1000 Pirovano Replica 2020?
-
To ensure good accessibility, the YZF-R1 1000 Pirovano Replica 2020 offers a minimum seat height of 855 mm (33.66 in).
- What is the price of the YZF-R1 1000 Pirovano Replica 2020?
-
The price of the YZF-R1 1000 Pirovano Replica 2020 is 27,836€ in France
News
-
Iannone wins at Mugello on a Harley Road Glide.
-
Sena is embarking on a connected adventure with the Outlander.
-
2026 Mugello Grand Prix: Bezzecchi's Triumph!
-
2026 German Grand Prix: Victories for L. Coenen, Valin, and Cannon
-
10 Ducati models in a special 100th-anniversary collection.
-
Luggage storage takes on a whole new dimension with Givi's XSpace.
-
Review of the Sena Specter: The Modular Helmet Ready for Connected Touring
-
Cokima - Panniers with airbags to protect your motorcycle.
-
SC-Project is focusing on the Kawasaki Z 500 and Ninja 500.
-
The new motorcycle models of 2026 and the evolutions.






Bikers' reviews Leave a review