presentation of the 1000 TESI H2 Carbon 2021
Quietly gearing up for its return to the market, Bimota is off to a flying start with a Tesi based on the compressed Kawasaki H2. Almost a symbolic transition... The greens have acquired almost half of the Italian craftsman, and the Tesi H2 arrives just as the career of Kawa's sports bike is coming to an end
So there's no risk of competition, even if the Tesi plays in a more luxurious register than its ex-brother-in-law.
And exclusivity. Of the 250 machines planned by Bimota, around ten will be produced in this Carbon edition. I stress the word edition rather than finish or specificity. The Tesi H2 is already amply equipped with the noble, dark material. The difference lies in the graphics used: more discreet on the Carbon, to emphasize this skin woven of resistance.
No jealousy or bitterness between the two - they're exactly the same. Except that the Carbon's greater rarity should have an impact on its price, whether for purchase or speculation.
The first new model in the Kawasaki-Bimota era (butthe 4th Bimota motorcycle with a Kawa engine), the Tesi H2 is almost a rolling laboratory, with a chassis that represents the culmination of the Tesi concept. The front swingarm is coupled with a steering system based on a steering hub and specially complex links. Front suspension is offset under the seat, with an electronically-controlled Öhlins shock absorber doing the job. The rear suspension is tucked in next to it, forming a striking new duo in current production.
The H2's 4-cylinder block begins a new life in the Italian. It pushes a little harder, with 231 horsepower and over 14 mkg. A copious amount of power that requires a number of safeguards. The advantage of the alliance with Kawasaki is that the Tesi takes over all the H2's electronics: TFT dashboard (although we'd have liked something more personal), IMU inertial unit, ABS and KIBS braking, KCMF trajectory management, KEBC engine brake control, Shifter, Launch Control, and 9-level traction control.
With its razor-sharp design, bordering on the violent, the Tesi H2 is a far cry from the BB3 or DB11 of its recent history. A new identity? but still a concern for machined parts, fine materials and exceptional sensations. Crowned by a price even more elitist than before
M.B - Manufacturer's photos
Key facts Bimota 1000 TESI H2 Carbon (2021) : What you need to know before you buy
Specifications Bimota 1000 TESI H2 Carbon 2021
- Chassis
- Frame : Aluminum side plates
- Fuel capacity : 17 liters (4.49 US gallons)
- Seat height : 840 mm (33.07 in)
- Length : 2,074 mm (81.65 in)
- Width : 770 mm (30.31 in)
- Min height : 1,155 mm (45.47 in)
- Wheelbase : 1,445 mm (56.89 in)
- Dry weight : 207 kg (456 lb)
- Front axle
- swingarm with steering hub + Öhlins shock absorber / Öhlins, Wheel travel : 100 mm (3.94 in)
- Preload, compression and rebound adjustment
- Braking 2 Brembo discs Ø 330 mm (12.99 in), 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Transmission
- 6 stage gearbox , manual - shifter as standard
- Secondary by chain
- Rear axle
- Öhlins monoshock / Öhlins, Wheel travel : 130 mm (5.12 in)
- Preload, compression and rebound adjustment
- Braking 1 disc Ø 220 mm (8.66 in), single-piston caliper
- Rear tire : 200 / 55 - 17 → Order this type of tire
- Motor
- 4 cylinders online , 4 strokes
- Injection Ø 50 mm + compressor
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 998 cc
- 231 ch (227.80 hp) to 11,500 rpm
- 242 hp with ram air
- 14.40 mkg to 11,000 rpm
- Power-to-Weight Ratio : 0.91 kg/ch
- Torque-to-Weight Ratio : 14.38 kg/mkg
- Compression : 8.5 : 1
- Standard equipment
- Brake assist : ABS
- Number of riding modes : 3
- Aluminium rims
- Shifter
- Steering damper
- Gear indicator
- Launch Control
- Traction control
- Anti-wheeling control
- Carbon fairing
- Forged rims
- Adjustable footrests
- Inertial measurement system
- Engine-brake control
- Practical information
Essentials
Gallery
Used
Compare the 1000 TESI H2 Carbon to its competitors
Compared to its direct competitor, this 1000 TESI H2 Carbon offers an appealing positioning, managing to stand out in certain specific areas. It stands out with power output of 231 ch, while also delivering torque of 14.4 Nm. Its torque-to-weight ratio of 14.38 kg/Nm limits its punch at low revs.
Price
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the 1000 TESI H2 Carbon 2021
- What is the power of the 1000 TESI H2 Carbon?
-
The 1000 TESI H2 Carbon 2021 develops a power of 231 ch (227.80 hp)
- What is the torque of the 1000 TESI H2 Carbon?
-
The maximum torque of the 1000 TESI H2 Carbon 2021 is 14.40 mkg to 11,000 rpm.
- What is the maximum speed of the 1000 TESI H2 Carbon?
-
The 1000 TESI H2 Carbon 2021 is capable of reaching a top speed of over 250 km/h (155.30 mph) on the track.
- What is the weight of the 1000 TESI H2 Carbon?
-
The 1000 TESI H2 Carbon 2021 has a a dry weight of 207 kg (456 lb).
- QWhat is the seat height of the 1000 TESI H2 Carbon?
-
To ensure good accessibility, the 1000 TESI H2 Carbon 2021 offers a minimum seat height of 840 mm (33.07 in).
- What is the price of the 1000 TESI H2 Carbon?
-
The price of the 1000 TESI H2 Carbon 2021 is 64,000€ in France
- What size tires should I put on my 1000 TESI H2 Carbon?
-
The standard size for a 1000 TESI H2 Carbon 2021 is 120 / 70 - 17 for the front, and 200 / 55 - 17 for the rear.
News
-
GIVI HLP Headlight Protector: Ténéré 700 and R1300GS
-
Victory and the championship title for BMW at the 2026 Bol d'Or.
-
The 89th Bol d'Or: A Celebration of Racing Passion.
-
2026 MXGP of China: Herlings Unbeatable, McLellan Delays the MX2 Title
-
MXGP 2027: Kove and ZXMoto Join the Championship
-
SC Project is working on the 2026 Suzuki GSX-R1000R.
-
2026 MXGP of Turkey: Herlings Crowned World Champion!
-
Moto Guzzi: In Mandello, the historic factory is taking on a new scale.
-
ZXMoto in MXGP 2027: The Hypothesis of an Off-Road Earthquake
-
The new motorcycle models of 2026 and the evolutions.

Motoblouz

LaBécanerie





Bikers' reviews Leave a review - 2 reviews
Expensive, indigestible for its price and design
Too complicated
Fortunately, there are Italians who make beautiful machines
JP PISANO Rating : 1/5 Respond to Balbu60