Motorcycle specifications Kawasaki ZX-14R 30th Anniversary Edition 2014 Between tribute and speed
presentation of the ZX-14R 30th Anniversary Edition 2014
the 30th anniversary of the 900 Ninja is the occasion for a number of celebrations and special series for Kawasaki. The ZZR 1400 takes advantage of the occasion with this 30th anniversary limited edition. Or should we say the ZX-14R Ninja, because that's what this road-going missile is called in the States. And that's where it gets tricky for the rest of the world: this series is only available in Uncle Sam's country.
just 300 units, with a special color scheme called "Firecracker Red" with "Metallic Graystone". A color combination we've seen before, and with good reason: the same as that of the 1984 GPZ 900 R. A few gold fillets and commemorative badges complete the distinctive look of this nostalgic 1400 ZX-14R. On the technical side, nothing has changed. The big 4-cylinder, 1441 cm3 engine, with its 200 hp and 16.4 mkg of torque, is still ready to pulverize your driving license in 5 seconds. Its aluminum monocoque frame is still a marginal technology in the sector, but it's both rewarding and efficient, with that unique touch appreciated by owners and technical enthusiasts alike. The GPZ 900 R Ninja can be proud of its descendants. Between the ZZR 1400, the ZX-10R and the 636 R, Ninja bikes are sharpening their blades more than ever on roads and circuits.
M.B - Manufacturer's photos
editor's note: the price shown is not an error. It's the US price converted into euros, excluding various taxes.
Key facts Kawasaki ZX-14R 30th Anniversary Edition (2014) : What you need to know before you buy
Specifications Kawasaki ZX-14R 30th Anniversary Edition 2014
- Chassis
- Frame : monocoque in aluminum
- Fuel capacity : 22 liters (5.81 US gallons)
- Seat height : 800 mm (31.50 in)
- Length : 2,170 mm (85.43 in)
- Width : 770 mm (30.31 in)
- Min height : 1,170 mm (46.06 in)
- Wheelbase : 1,480 mm (58.27 in)
- Weight when fully loaded : 268 kg (591 lb)
- Front axle
- Telehydraulic fork Ø 43 mm, Wheel travel : 117 mm (4.61 in)
- Braking 2 discs Ø 310 mm (12.2 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Transmission
- 6 stage gearbox
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 124 mm (4.88 in)
- Braking 1 disc Ø 250 mm (9.84 in), 2-piston caliper
- Rear tire : 190 / 50 - 17 → Order this type of tire
- Motor
- 4 cylinders online , 4 strokes
- Injection ø 44 mm
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 1,441 cc
- 200 ch (197.20 hp) to 10,000 rpm
- 210 hp with ram air
- 16.40 mkg to 7,500 rpm
- Power-to-Weight Ratio : approx. 1.26 kg/ch
- Torque-to-Weight Ratio : approx. 15.21 kg/mkg
- Compression : 12.3 : 1
- Standard equipment
- Brake assist : ABS as standard
- Practical information
Essentials
Gallery
Used
Compare the ZX-14R 30th Anniversary Edition to its competitors
Compared to its 3 direct competitors, this ZX-14R 30th Anniversary Edition offers an appealing positioning, managing to stand out in certain specific areas. It stands out with power output of 200 ch, while also delivering torque of 16.4 Nm. Its torque-to-weight ratio of 15.21 kg/Nm limits its punch at low revs.
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the ZX-14R 30th Anniversary Edition 2014
- What is the power of the ZX-14R 30th Anniversary Edition?
-
The ZX-14R 30th Anniversary Edition 2014 develops a power of 200 ch (197.20 hp)
- What is the torque of the ZX-14R 30th Anniversary Edition?
-
The maximum torque of the ZX-14R 30th Anniversary Edition 2014 is 16.40 mkg to 7,500 rpm.
- What is the maximum speed of the ZX-14R 30th Anniversary Edition?
-
The ZX-14R 30th Anniversary Edition 2014 is capable of reaching a top speed of approximately 300 km/h (186.40 mph) on the track.
- What is the weight of the ZX-14R 30th Anniversary Edition?
-
The ZX-14R 30th Anniversary Edition 2014 has a a weight when fully loaded of 268 kg (591 lb).
- QWhat is the seat height of the ZX-14R 30th Anniversary Edition?
-
To ensure good accessibility, the ZX-14R 30th Anniversary Edition 2014 offers a minimum seat height of 800 mm (31.50 in).
- What is the price of the ZX-14R 30th Anniversary Edition?
-
The price of the ZX-14R 30th Anniversary Edition 2014 is 11,900€ in France
- What size tires should I put on my ZX-14R 30th Anniversary Edition?
-
The standard size for a ZX-14R 30th Anniversary Edition 2014 is 120 / 70 - 17 for the front, and 190 / 50 - 17 for the rear.
News
-
CFMOTO 675SR-R: Official Motorcycle of the WorldWCR Starting in 2027
-
News on the Street Triple 798, Bonneville 400, Tiger 900, and Tiger 1200.
-
2026 MXoN in Ernée: Belgium Wins, France Falls
-
Furygan offers an airbag vest designed specifically for women.
-
Top 10 Best Scooters of 2026: Our Complete Ranking.
-
Motorcycle Intercoms—A Practical Guide to Choosing the Right One for Your Needs.
-
HJC is gearing up for a big year in 2027, with eight new helmets.
-
Triumph succeeded BSA in the Motocross World Championship.
-
BMW S1000RR Recall Alert: Risk of Engine Shutdown
-
The new motorcycle models of 2026 and the evolutions.

Motoblouz

LaBécanerie





Bikers' reviews Leave a review