The Honda motorcycles 2019
What's changing in 2019
The CBR 1000 RR & SP are finely tuned in terms of electronics. The CBR 650 gains a little in sportiness with an R evolution, while the CB 500 range is revised.
The daily trail is inspired by enduro with a CRF 450 L.
The VFR 1200 X Crosstourer, CRF 250 L and CRF 250 Rally disappear from the catalog.
Naked
-
NC 750 S
-
MSX 125
-
Monkey 125
-
CB 125 R
-
CB 1000 R+ Limited Edition
-
CB 1100 EX
-
CB 1000 R
-
CB 1000 R Sunset
-
CB 500 F
-
CBF 125
-
CB 300 R
-
CB 1100 RS
-
CB 1000 R+
-
CB 1000 R Seventy 70th Swiss Limited Edition
-
CB 650 R
-
CB 1100 RS 5Four
On-Off Road
-
CRF 1000 L AFRICA TWIN Adventure Sports
-
VFR 800 X CROSSRUNNER
-
CB 500 X
-
NC 750 X
-
CRF 1000 L AFRICA TWIN
-
CRF 450 L
Sport
Sport touring
Touring
Cruiser
Motocross
Enduro
There have been 4 recalls for 2019 models :
- GL 1800 GOLDWING bagger GL 1800 GOLDWING Tour GL 1800 GOLDWING Tour DCT/Airbag
The clamping bolt of the primary drive pinion is subject to fatigue failure due to excessive stress caused by bending forces. When this happens, the impulse rotor becomes dislodged, resulting in ignition signal failure and engine stalling while driving, or inability to start. This creates a risk of accident and injury to vehicle occupants.
- CBR 1000 RR Fireblade CBR 1000 RR Fireblade SP GL 1800 GOLDWING bagger GL 1800 GOLDWING Tour GL 1800 GOLDWING Tour DCT/Airbag
The fuel pump impeller may be defective, preventing the supply of fuel, which could lead to a power cut or engine stoppage. If this occurs while driving, it creates a risk of accident and injury.
Production dates:
- 14/11/2017 (CBR600RA/RR)
- 14/12/2016 (CBR1000RA/RR/S1/S2)
- 31/10/2017 (GL1800/BD/B/DA)
- CB 500 X CBR 500 R CB 500 F
In the ABS modulator (anti-lock braking system), an excessive amount of grease has been applied to the O-ring of the reservoir piston due to poor management of the grease application equipment on the components. When used continuously under these conditions, foreign bodies adhere to the grease that has moved to the outlet valve and can get caught in the check valve during braking, causing inlet pressure leakage and increasing braking distance.
Production dates :
- CBR500RA - August 26, 2019 - December 20, 2019
- CB500FA - July 31, 2019 - December 15, 2019
- CB500XA - June 20, 2019 - January 17, 2020
- CRF 1000 L AFRICA TWIN CRF 1000 L AFRICA TWIN Adventure Sports
Excessive grease was applied to the O-ring of the reservoir piston in the ABS (Anti-lock Braking System) modulator. As a result, foreign matter may adhere to the grease and become pinched in the check valve during braking, causing input pressure leak and increasing the braking distance.
helmet
Gloves
jacket
braking
Chain kit
Oils
Find an intercom
Parts
Luggage
Tires