presentation of the R1 1000 Jonathan Rea Replica 2024
Even though this is the last year we'll see the R1 on sale for off-road use (after that, it's track-only*), that doesn't stop Yamaha from throwing in a few surprises. The proof is in the Jonathan Rea Replica edition. Crescent, the official World Superbike team, is celebrating the arrival of the multiple world champion in its ranks with this superb special series.
Beautiful and intense! Iwata's hypersport perfectly captures the scent of competition with its colors. Unusually, this replica is available in two distinct liveries. Either the official livery of the machine entered for the 2024 season, or the stealthy "Winter Test" livery used during off-season testing.
The number 65 has been Johnny's companion for many years. It can also be found on the fairing of this R1, as in the number of models produced. Rea and team manager Paul Denning will certify each model themselves, from the first to the 65th enthusiast.
Beware, the Crescent team isn't content with a pretty exterior and an endorsement by the six-time WSBK champion. The bike benefits from a good dose of preparation, to make it more desirable and efficient; but not too much either, so that it retains its right to ride on the road.
It all starts with a handsome Akrapovic titanium exhaust system, feeding the powerful, growling sound of the 200-hp Crossplane 4-cylinder. Then, top-notch roadholding with Marchesini forged-aluminum wheels wrapped in Pirelli SuperCorsa SP tires. More responsive braking with a Brembo 19 RCS master cylinder and HEL braided hoses. From there, an improved secondary transmission with a DID 520 chain and Gandini 16/41 sprocket set. And then..
More good stuff, with plenty of Öhlins on board. The Swedish brand takes care of damping on both sides, but not entirely. This R1 doesn't get a complete fork, but an in-house preparation, with a NIX cartridge kit, springs and oil to match. A TTX rear shock absorber and a steering damper from the same manufacturer complete the package.

this beautiful R1 also thinks about protecting itself (you too, youngsters) with GB Racing and GYTR components. Crescent goes the extra mile with a JR (Jonathan Rea) branded racing seat, a small plate holder, a "shark fin" type chain guard, wheel axle ends, Pro-Bolt titanium engine and chassis mountings, a carbon seat cover and tank extension.
For the most ferocious of brakers, the British team offers a very nasty optional kit (at £2,000), with Brembo GP4-RX calipers and T-Drive discs. Big stuff! Also available is a 700-lb. garage pack, with a cover, mat and workshop crutches.
With all this, this R1 replica JR isn't cheap. 29,995 pounds, or just over 35,000 euros. Don't worry about selling out the 65 units: Crescent's previous special series, at the end of 2021, sold out in less than 36 hours. You can still try your hand at this superb model by clicking here and making a deposit of 500 pounds.
M.B - Image credits: Crescent
Key facts Yamaha R1 1000 Jonathan Rea Replica (2024) : What you need to know before you buy
Prices
| Basic version | |
|---|---|
|
35,100€
|
Model sold in 2024
Replace R1 1000 Limited Edition Toprak Razgatlioglu 2022
Performance
- Max speed : approximately 300 km/h (186.40 mph)
- Average fuel consumption : 7.20 liters/100km (0.33 mpg)
-
Estimated range
: 236 km (147 miles)
Calculated range until tank is empty, not verified.
Specifications Yamaha R1 1000 Jonathan Rea Replica 2024
- Chassis
- Frame : diamond aluminum perimeter
- Fuel capacity : 17 liters (4.49 US gallons)
- Seat height : 855 mm (33.66 in)
- Length : 2,055 mm (80.91 in)
- Width : 690 mm (27.17 in)
- Min height : 1,165 mm (45.87 in)
- Wheelbase : 1,405 mm (55.31 in)
- Weight when fully loaded : 201 kg (443 lb)
- Front axle
- Öhlins-prepared 43 mm telehydraulic upside-down forks / Öhlins, Wheel travel : 120 mm (4.72 in)
- Preload, compression and rebound adjustment
- Braking 2 discs Ø 320 mm (12.6 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Transmission
- 6 stage gearbox , manual - shifter as standard
- Secondary by chain
- Rear axle
- Öhlins monoshock / Öhlins, Wheel travel : 120 mm (4.72 in)
- Preload, compression and rebound adjustment
- Braking 1 disc Ø 220 mm (8.66 in), single-piston caliper
- Rear tire : 190 / 55 - 17 → Order this type of tire
- Motor
- 4 cylinders online , 4 strokes, Crossplane - 270° - 180° - 90° - 180° shimming
- Injection
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 998 cc
- 200 ch (197.20 hp) to 13,500 rpm
- 11.60 mkg to 11,500 rpm
- Power-to-Weight Ratio : approx. 0.94 kg/ch
- Torque-to-Weight Ratio : approx. 16.05 kg/mkg
- Compression : 13 : 1
- CO² emissions: 168 g/km
- Standard equipment
- Brake assist : ABS de série
- Number of riding modes : 4
- TFT Full-Colour screen size: 10.92 cm (4.3 inches)
- Aluminium rims
- Shifter
- Steering damper
- Gear indicator
- Launch Control
- Traction control
- Anti-wheeling control
- Forged rims
- Traction control
- Engine-brake control
- Practical information
Essentials
Gallery
Used
Compare the R1 1000 Jonathan Rea Replica to its competitors
Compared to its 4 direct competitors, this R1 1000 Jonathan Rea Replica offers a fairly balanced positioning, sitting right in the middle of the category. On the spec sheet, it highlights torque of 11.6 Nm and top speed of 300 km/h. In terms of horsepower, its output of 200 ch lags behind the segment leaders.
Acceleration
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
CO² emissions
FAQ Your frequently asked questions about the R1 1000 Jonathan Rea Replica 2024
- What is the power of the R1 1000 Jonathan Rea Replica?
-
The R1 1000 Jonathan Rea Replica 2024 develops a power of 200 ch (197.20 hp)
- What is the torque of the R1 1000 Jonathan Rea Replica?
-
The maximum torque of the R1 1000 Jonathan Rea Replica 2024 is 11.60 mkg to 11,500 rpm.
- What is the maximum speed of the R1 1000 Jonathan Rea Replica?
-
The R1 1000 Jonathan Rea Replica 2024 is capable of reaching a top speed of approximately 300 km/h (186.40 mph) on the track.
- What is the weight of the R1 1000 Jonathan Rea Replica?
-
The R1 1000 Jonathan Rea Replica 2024 has a a weight when fully loaded of 201 kg (443 lb).
- What is the fuel consumption of the R1 1000 Jonathan Rea Replica?
-
Average fuel consumption is estimated at 7.20 l/100km (0.33 mpg) according to the WMTC cycle.
- QWhat is the seat height of the R1 1000 Jonathan Rea Replica?
-
To ensure good accessibility, the R1 1000 Jonathan Rea Replica 2024 offers a minimum seat height of 855 mm (33.66 in).
- What is the price of the R1 1000 Jonathan Rea Replica?
-
The price of the R1 1000 Jonathan Rea Replica 2024 is 35,100€ in France
- What size tires should I put on my R1 1000 Jonathan Rea Replica?
-
The standard size for a R1 1000 Jonathan Rea Replica 2024 is 120 / 70 - 17 for the front, and 190 / 55 - 17 for the rear.
- What colors are available for the R1 1000 Jonathan Rea Replica?
-
For the 2024 model year, the R1 1000 Jonathan Rea Replica is available in several colors: blue and grey / black.
News
-
Triumph succeeded BSA in the Motocross World Championship.
-
BMW S1000RR Recall Alert: Risk of Engine Shutdown
-
GIVI HLP Headlight Protector: Ténéré 700 and R1300GS
-
Victory and the championship title for BMW at the 2026 Bol d'Or.
-
The 89th Bol d'Or: A Celebration of Racing Passion.
-
2026 MXGP of China: Herlings Unbeatable, McLellan Delays the MX2 Title
-
MXGP 2027: Kove and ZXMoto Join the Championship
-
SC Project is working on the 2026 Suzuki GSX-R1000R.
-
2026 MXGP of Turkey: Herlings Crowned World Champion!
-
The new motorcycle models of 2026 and the evolutions.

Motoblouz

LaBécanerie





Bikers' reviews Leave a review - 1 review