presentation of the RSV 1000 R EDWARDS REPLICA 2003
In 2002, Aprilia offered a limited edition of its RSV 1000 R: the Haga Replica, based on the aesthetics of the Japanese rider's Superbike. Following the success of this model, the factory used the same weapons again, but changed the name of the chosen one to Colin Edwards. For €2,000 more than the RSV 1000 R (which is already very well equipped), you'll get Colin's machine-specific deco, a sublime blue anodized open-work fork crown bearing the rider's name, a double Akrapovic exhaust, a few extra carbon parts and modified mapping.
And if you want a little more fun, a 16-tooth sprocket and a microchip are also included in a small bag to give the Italian twin even more life. It gains 3 hp over the RSV R and 
M.B - (manufacturer's photos)
Key facts Aprilia RSV 1000 R EDWARDS REPLICA (2003) : What you need to know before you buy
Highlights
- Efficiency and character
- Stability and precision
- Freinage
Weak points
- Operating the instrument panel
- Ground clearance
- Price
Prices
| Basic version | |
|---|---|
|
17,999€
|
Model sold in 2003
Performance
- Max speed : 270 km/h (167.80 mph)
- Average fuel consumption : 7 liters/100km (0.34 mpg)
-
Estimated range
: 257 km (160 miles)
Calculated range until tank is empty, not verified.
Specifications Aprilia RSV 1000 R EDWARDS REPLICA 2003
- Chassis
- Frame : double aluminium alloy beam
- Fuel capacity : 18 liters (4.76 US gallons)
- Seat height : 825 mm (32.48 in)
- Length : 2,070 mm (81.50 in)
- Width : 725 mm (28.54 in)
- Min height : 1,170 mm (46.06 in)
- Wheelbase : 1,415 mm (55.71 in)
- Dry weight : 182 kg (401 lb)
- Front axle
- Öhlins telehydraulic upside-down forks Ø 43 mm / Öhlins, Wheel travel : 120 mm (4.72 in)
- Braking 2 discs Ø 320 mm (12.6 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Transmission
- 6 stage gearbox , manual
- Secondary by chain
- Rear axle
- Öhlins monoshock / Öhlins, Wheel travel : 135 mm (5.31 in)
- Braking 1 disc Ø 220 mm (8.66 in), 2-piston caliper
- Rear tire : 190 / 50 - 17 → Order this type of tire
- Motor
- two-cylinder 60° V-shape , 4 strokes
- Injection Ø 57 mm
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 997.60 cc
- 135 ch (133.10 hp) to 10,000 rpm
- 10.30 mkg to 8,000 rpm
- Power-to-Weight Ratio : 1.37 kg/ch
- Torque-to-Weight Ratio : 17.67 kg/mkg
- Compression : 11.4:1
- Practical information
Essentials
Gallery
Used
Competitors
Compare the RSV 1000 R EDWARDS REPLICA to its competitors
Compared to its 4 direct competitors, this RSV 1000 R EDWARDS REPLICA offers an appealing positioning, managing to stand out in certain specific areas. It stands out with riding range of 257 km. With 10.3 Nm of torque, it feels a bit less lively during mid-range roll-ons.
Acceleration
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the RSV 1000 R EDWARDS REPLICA 2003
- What is the power of the RSV 1000 R EDWARDS REPLICA?
-
The RSV 1000 R EDWARDS REPLICA 2003 develops a power of 135 ch (133.10 hp)
- What is the torque of the RSV 1000 R EDWARDS REPLICA?
-
The maximum torque of the RSV 1000 R EDWARDS REPLICA 2003 is 10.30 mkg to 8,000 rpm.
- What is the maximum speed of the RSV 1000 R EDWARDS REPLICA?
-
The RSV 1000 R EDWARDS REPLICA 2003 is capable of reaching a top speed of 270 km/h (167.80 mph) on the track.
- What is the weight of the RSV 1000 R EDWARDS REPLICA?
-
The RSV 1000 R EDWARDS REPLICA 2003 has a a dry weight of 182 kg (401 lb).
- What is the fuel consumption of the RSV 1000 R EDWARDS REPLICA?
-
Average fuel consumption is estimated at 7 l/100km (0.34 mpg) according to the WMTC cycle.
- QWhat is the seat height of the RSV 1000 R EDWARDS REPLICA?
-
To ensure good accessibility, the RSV 1000 R EDWARDS REPLICA 2003 offers a minimum seat height of 825 mm (32.48 in).
- What is the price of the RSV 1000 R EDWARDS REPLICA?
-
The price of the RSV 1000 R EDWARDS REPLICA 2003 is 17,999€ in France
- What size tires should I put on my RSV 1000 R EDWARDS REPLICA?
-
The standard size for a RSV 1000 R EDWARDS REPLICA 2003 is 120 / 70 - 17 for the front, and 190 / 50 - 17 for the rear.
News
-
Triumph succeeded BSA in the Motocross World Championship.
-
BMW S1000RR Recall Alert: Risk of Engine Shutdown
-
GIVI HLP Headlight Protector: Ténéré 700 and R1300GS
-
Victory and the championship title for BMW at the 2026 Bol d'Or.
-
The 89th Bol d'Or: A Celebration of Racing Passion.
-
2026 MXGP of China: Herlings Unbeatable, McLellan Delays the MX2 Title
-
MXGP 2027: Kove and ZXMoto Join the Championship
-
SC Project is working on the 2026 Suzuki GSX-R1000R.
-
2026 MXGP of Turkey: Herlings Crowned World Champion!
-
The new motorcycle models of 2026 and the evolutions.

Motoblouz

LaBécanerie





Bikers' reviews Leave a review - 1 review
Parts are very expensive Rating : 5/5 Respond to lionel