presentation of the RSV4 1000 FACTORY 2011
the long-awaited new Aprilia RSV 4 made its debut at the Piaggio convention in Milan in February. In front of 1,200 privileged spectators, the Noale brand's new sporting jewel unveiled its "Race Machine" attributes and pretensions. An all-new, hyper-compact 1000 cc V4 (a video of which can be seen at the end of this article), open at 65°, over 200 hp in race configuration, and integral Ride by wire technology opening up new perspectives in traction control.
the choice of a V4 allows us to refine the bike's silhouette and aerodynamic coefficient as much as possible. The idea of this type of engine configuration brings a smile to the face, as it inevitably reminds us of the heyday of the Honda RC 30 and 45. The carbon silhouette of the machine already gave an appetizing glimpse of what the road version of the RSV4 would be like. Sharp, sometimes protruding lines, with a very aggressive tendency, on a brand-new chassis. A double aluminum beam with a very conventional design, anchoring at its ends an inverted fork with Brembo radial brake calipers and a very strong swingarm.

and in September, here's its civilian version. This is the Factory version, with Öhlins suspension and a few carbon parts. And what can we say about its design, its look, its compactness...!?! A raptor, with a menacing triple look. Its new face is no longer pierced by a front air intake; forced air now passes through 2 gills located under the side headlights. The reduced fairing reveals the new frame where the famous 65° 1000 cc V4 resides. In terms of power, Aprilia is catching up with the Japanese by announcing an impressive 180 hp.
and 179 kg for a machine that smells more of the track than anything else. Aprilia has put a lot more into its new sports bike than just a nice, compact V4. The column angle is adjustable, as is the swingarm anchorage and the position of the engine in the chassis. Of course, the equipment is equally impressive, with Öhlins, an SBK-escaped swingarm, Brembo monobloc radial calipers, forged aluminum rims... and to take the lady along, that's going to be a problem: is it really a coincidence that the bike is shown with Diablo Superbike tires, an ultra-short rear frame with a single-seater seat and no passenger footrests? After dominating the 125 and 250 classes, Aprilia intends to put its stamp on its return to Superbikes, scheduled for 2009.
aprilia RSV4 official video
the development of the new V4 (er... it's in Italian) :
Key facts Aprilia RSV4 1000 FACTORY (2011) : What you need to know before you buy
Highlights
- Sleek silhouette
- V4 hypersport
- SBK fragrance
Weak points
- Recipe?
- Passenger banned
Prices
| Basic version | |
|---|---|
|
19,990€
|
Performance
- Max speed : 304 km/h (188.90 mph)
Specifications Aprilia RSV4 1000 FACTORY 2011
- Chassis
- Frame : Double aluminum perimeter beam
- Fuel capacity : 17 liters (4.49 US gallons)
- Seat height : 845 mm (33.27 in)
- Length : 2,050 mm (80.71 in)
- Width : 715 mm (28.15 in)
- Min height : 1,165 mm (45.87 in)
- Wheelbase : 1,424 mm (56.06 in)
- Dry weight : 179 kg (395 lb)
- Front axle
- Öhlins 43 mm inverted telehydraulic forks, Wheel travel : 120 mm (4.72 in)
- Braking 2 discs Ø 320 mm (12.6 in), radial mounting, 4-piston caliper
- Front tire : 120 / 70 - 17 → Order this type of tire
- Transmission
- 6 stage gearbox
- Secondary by chain
- Rear axle
- Mono-damper, Wheel travel : 130 mm (5.12 in)
- Braking 1 disc Ø 220 mm (8.66 in), single-piston caliper
- Rear tire : 190 / 55 - 17 → Order this type of tire
- Motor
- 4 cylinders 65° V-shaped , 4 strokes
- Injection Ø 48 mm
- Cooling system : liquid
- 2 ACT
- 4 valves per cylinder
- 998 cc
- 180 ch (177.50 hp) to 12,500 rpm
- 11.50 mkg to 10,000 rpm
- Power-to-weight ratio : 1.01 kg/ch
- Weight / torque ratio : 15.57 kg/mkg
- Compression : 13 : 1
- Practical information
Gallery
Used
Compare the RSV4 1000 FACTORY to its competitors
Acceleration
Fuel consumption
Range
Torque
Power
Power-to-Weight ratio
Torque-to-Weight ratio
Speed
FAQ Your frequently asked questions about the RSV4 1000 FACTORY 2011
- What is the power of the RSV4 1000 FACTORY 2011?
-
The RSV4 1000 FACTORY 2011 develops a power of 180 ch (177.50 hp)
- What is the torque of the RSV4 1000 FACTORY 2011?
-
The maximum torque of the RSV4 1000 FACTORY 2011 is 11.50 mkg to 10,000 rpm.
- What is the maximum speed of the RSV4 1000 FACTORY 2011?
-
The RSV4 1000 FACTORY 2011 is capable of reaching a top speed of 304 km/h (188.90 mph) on the track.
- What is the weight of the RSV4 1000 FACTORY 2011?
-
The RSV4 1000 FACTORY 2011 has a a dry weight of 179 kg (395 lb).
- QWhat is the seat height of the RSV4 1000 FACTORY 2011?
-
To ensure good accessibility, the RSV4 1000 FACTORY 2011 offers a minimum seat height of 845 mm (33.27 in).
- What is the price of the RSV4 1000 FACTORY 2011?
-
The price of the RSV4 1000 FACTORY 2011 is 19,990€ in France
News
-
How to Choose a Motocross Helmet?
-
Bose audio in Sena intercoms.
-
Triple XL size and a matte carbon finish for the HJC F100 helmet.
-
BMW is celebrating the 50th anniversary of the RS series.
-
Brembo launches its GP4-MotoGP caliper, the competition-grade component.
-
A breath of fresh air for the Yamaha R9 with SC-Project
-
How do you choose motorcycle gloves based on the season and your riding style?
-
Top Block specializes in the V-Strom 800DE and its protective gear.
-
ContiSportAttack 5 Tire Review - The Call of Confidence.
-
The new motorcycle models of 2026 and the evolutions.






Bikers' reviews Leave a review - 1 review